Call Us 080-41656200 (Mon-Sat: 10AM-8PM)
Free Shipping above Rs. 1499
Cash On Delivery*

High Speed Ductile Mode End Milling of Silicon with Air Blowing


Marketed By :  LAP LAMBERT Academic Publishing   Sold By :  Kamal Books International  
Delivery in :  10-12 Business Days


Check Your Delivery Options

Rs. 4,165

Availability: In stock

  • Product Description

Silicon is widely used in industry due its properties such as good thermal shock resistance, good high temperature strength, creep resistance, low density, high hardness, electrical resistivity and good chemical resistivity. Silicon generally undergoes grinding, polishing and lapping processes in order to get good surface finish but in the present study the high speed end milling with ductile mode has been suggested to machine the silicon. Ductile mode machining of silicon is hard to obtain due to the brittle properties of silicon and hardness of tool materials. A brittle material will have little tendency to deform before it fractures when it is subjected to stress. Thus, right machining parameters plays an important role to obtain the ductile mode machining such as cutting speed, depth of cut and feed rate. In the previous research ‘Ductile Mode Machining of Silicon Using High Speed End Milling’ conducted by Mohd Dali and Muhammad Iqbal, the ductile mode machining was achieved but ductile chips produced during machining were found to be deposited on the machined silicon surface. The deposited chips were strongly bonded to the surface and could not be removed by blowing or other

Product Specifications
SKU :COC93028
AuthorA.K.M. Nurul Amin,Siti Nurshahida Mohd Nasir and Noor Syairah Khalid
Number of Pages148
Publishing Year2013-09-07T00:00:00.000
Edition1 st
Book TypeAerospace & aviation technology
Country of ManufactureIndia
Product BrandLAP LAMBERT Academic Publishing
Product Packaging InfoBox
In The Box1 Piece
Product First Available On ClickOnCare.com2015-10-08 00:00:00